There is no single best tomato feed for every garden. The right choice depends on whether your tomatoes grow in the ground, in raised beds or in pots, what your soil already holds, and which stage of growth the plants have reached. This guide covers the main feed types, how to match them to how you grow, a simple timeline, and how to tell when you have fed too little or too much.
What tomatoes need from a feed
Tomatoes are heavy feeders. A fertiliser label shows three numbers for nitrogen (N), phosphorus (P) and potassium (K), in that order. Tomatoes also need calcium and magnesium, plus small amounts of trace elements such as iron and manganese.
- Nitrogen drives leafy growth. Plants need some early on, but too much pushes lush foliage at the expense of flowers and fruit.
- Potassium supports flowering and fruit development, which is why many tomato feeds contain more potassium than general-purpose feeds.
- Phosphorus supports root growth and early development.
- Calcium has to reach the fruit through steady watering. Blossom end rot usually comes from uneven watering rather than a shortage in the feed, so feeding alone will not prevent it.
Most garden soils hold some of these nutrients, but a crop that grows for months, especially in containers, usually needs topping up.
Types of tomato feed
Tomato-specific liquid feeds
These are diluted in water and applied every week or two. They act quickly and are easy to adjust, which makes them useful once the plants start flowering. Follow the dilution on the label, and water the soil before you feed.
General-purpose and balanced feeds
A balanced feed suits mixed beds and early growth. Once fruit starts to form, it may contain more nitrogen than tomatoes need, so it is often better to switch to a tomato-specific product.
Slow-release granules and pellets
Mixed into the soil at planting or spread on the surface, these release nutrients over weeks or months. The release rate depends on the product, the temperature and how much you water, so follow the label. They work well as a base, with liquid feed added later in the season.
Organic feeds
Compost, aged manure, seaweed and fish-based products release nutrients slowly and rely on soil life to make them available. They are covered in more detail in our guide to organic tomato feeding.
Matching feed to how you grow
In the ground or raised beds
Garden soil holds nutrients and buffers changes better than a pot does. A common approach is to dig in compost or a slow-release base before planting, then add a tomato-specific liquid feed once the fruit sets. If you are unsure about the soil, check its pH first. Our soil pH guide explains how to test it, and our guide to soil for in-ground tomatoes covers texture and drainage.
Containers and grow bags
Water drains through pots and carries nutrients with it, so containers usually need feeding more often in smaller doses. Use a peat-free or soilless potting mix rather than garden soil, which compacts and drains poorly in a pot. Many potting mixes include some starter fertiliser, but it runs out, so plan to feed through the season. See how often to feed tomatoes in pots and containers and the best compost for tomatoes in pots.
A simple feeding timeline
Always follow the product label, since rates differ between products.
- At planting: Mix a base feed or compost into the planting hole or pot. Keep granules away from roots and stems.
- Early growth: A light feed is usually enough. Too much nitrogen at this stage gives you plenty of leaves and few flowers.
- Flowering: Switch to a tomato feed with more potassium, or keep going with a tomato-specific liquid. See tomato care during flowering.
- Fruiting: Feed regularly. Many guides suggest every one to three weeks, depending on the product and whether the plants are in pots.
- Late season: Ease off as the season winds down and the fruit ripens.
Signs you are feeding too little or too much
Too little feed can show as pale or yellowing lower leaves, slow growth, small fruit and weak flowering (see yellow leaves on tomato plants). Too much can show as very dark, lush leaves with few flowers, brown or scorched leaf edges, and a white crust on the soil.
Several problems look alike, so check watering and recent feeding before you change anything. Our guide to fixing over-fertilised tomatoes covers the over-feeding case in detail.
Mistakes to avoid
- Feeding dry soil. Water first, then feed, to reduce the risk of root burn.
- Using a high-nitrogen feed late in the season. It pushes leaves when the plant should be ripening fruit.
- Doubling up. Using two feeds at full strength is a common way to overdo it.
- Relying on additives for sweetness. There is little good evidence that Epsom salt or baking soda makes tomatoes sweeter. Our baking soda guide explains why.
Frequently asked questions
What is the best fertiliser for tomato plants?
For most gardeners, the answer is a base of compost or a slow-release feed at planting, followed by a tomato-specific liquid feed once the fruit sets. That combination covers both early growth and the fruiting stage.
Which organic fertiliser is best for plant growth?
For tomatoes, compost works well as the base for most soils. Once the plants flower, an organic feed with a higher potassium content can support fruiting. Our organic feeding guide compares the options.
Should I let my tomato plants dry out between waterings?
No. Keep the soil evenly moist. Uneven watering can cause fruit to crack and contributes to blossom end rot. See why tomatoes split. Feeding dry roots also raises the risk of burn, so water before you feed.